InTENSity 5000 Hybrid Tens Unit New with Case, model # DI3302-OTC, NEW

Description

InTENSity 5000 HYBRID, ITEM #
DI3302-OTC
New with Case + Free US Priority Shipping!
Is it digital? Is it analog? It is both! This device combines the ease of traditional
knobs with the beauty of LED technology to give the user the feedback they need to get
the right therapy at the right time.
One unit for a full range of electrotherapy applications
5 modes of TENS (Transcutaneous Electro-Nerve Stimulator) Unit Stimulation
2 controllable output channels, each independent of each other
Comes with set of electrodes /wires/ ac adapter (plug-in) not included but available
Comes with 1 year manufacturers warranty
What is a Tens Unit?
TENS stands for (Transcutaneous Electrical Nerve Stimulation). which are predominately used for nerve
related pain conditions for both acute and chronic conditions. TENS machines send stimulating pulses
across the surface of the skin and along the nerve strands which help prevent pain signals from reaching
the brain. They also stimulate your body to produce higher levels of its own natural painkillers,
called "Endorphins".
Features:
The InTENSity 5000 combines the ease of traditional knobs with the beauty of LED technology
to give the user the feedback they need to get the right therapy at the right time.
The InTENSity™ 5000 Hybrid has 5 modes and a timer, comes in a nice hard case, electrodes,
user manual, lead wires and 9-volt battery.
Channel:Dual, isolated between channels
Wave Form:Mono-phase square pulse wave
Pulse Amplitude:Adjustable, 0 to 80 mA peak into 500 ohm load each channel
Pulse Rate:Adjustable, from 2 to 150 Hz
Burst rate: 0.5 Hz (Burst mode)
Pulse Width:Adjustable, from 30 to 260 microseconds
Output Voltage:0 to 40 V (Load: 500 ohm)
Burst:Bursts occur twice every second. Pulse width (adjustable), pulse
rate = 100 Hz, Burst rate = 0.5 Hz
Normal Mode:The pulse rate and pulse width are adjustable. It generates continuous
stimulation based on the setting value
Modulation 1 Mode:
Modulation 1 mode is a pulse width modulation. The pulse width is
automatically varied in a cycle pattern over an interval of nominally 10
seconds. Pulse width increase over a period of 5 seconds from 30 us
to the control setting value, then decreases over a 5 second period
to its original value.
Modulation 2 Mode:
Modulation 2 mode is a pulse rate modulation. The pulse rate is
automatically varied in a cycle pattern over an interval of nominally 10
seconds. Pulse rate decreases over a period of 5 seconds from the
control setting value to a value which is 40% less, then increases over
a 5 second period to its original value. They cycle is then repeated.
SD Mode:
The SD (Strength-Duration) mode consists of automatic modulation intensity
and pulse width in 70% range. The intensity is always while the
pulse width is decreasing and vice versa. The intensity is decreased
by 70% while the pulse width is increased by 70% in 5 seconds. In
the next 5 seconds, the intensity is increased by 70% while the pulse
width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate
(2~150Hz) and pulse width (30~260uS) are fully adjustable.
Timer:15, 30, 60 minutes or continue
Uses:
Relaxation of muscle spasms
Prevention of muscle retardation of disuse atrophy
Increasing local blood circulation
Muscle re-education
Immediate post-surgical stimulation
Maintaining or increasing range of motion
Package Includes:
Stimulator
Lead Wires (New FDA compliant)
4 Self-stick Reusable Electrodes
Battery
Carrying Case
Instruction Booklet
Directions:
Clean the skin thoroughly
Proper skin care will help make your program more comfortable and trouble-free.
Check Battery
Be sure you are using a fresh battery.
Prepare Electrodes
Follow the instructions included in the electrode pads you choose
Connect The Electrodes to the Lead Wires
Place Electrodes on Skin
Apply the electrodes to the exact site indicated by your physician following the instruction
included with the electrode system. Make sure that the electrodes are placed firmly to the
skin making good contact between the skin and the electrodes.
Connect Lead Wires to the Output Sockets
The InTENSity 5000 Hybrid Unit is supplied with two twin lead wires.
This device has two output receptacles controlled by Channel 1 and Channel 2 at the top of the unit. You may choose to use one channel with one pair of lead wires or both channels with two pairs of lead wires. Using both channels gives the user the advantage of stimulating two different areas at the same time.